A Comparison of Han China and India Essay

Mauryan/Gupta India from 320 B.C.E. to 550 C.E. had similar as well as different methods of political control with that of Han China from 206 B.C.E. to 220 C.E. in the sense that both used culture to justify social inequality supported with the idea of rising in social status and the use of religion to help with political control. The differences were more seen by the twos’ organization in political control as well as the language role in the midst of the civilizations. The differences between the Han and Gupta/Mauryan had been largely attributed to the main sense of political organization when keeping a civilization running. Han China was more organized due to a solid bureaucracy as a solid political system where all people would be told what’s what so there wouldn’t be confusion as to where ideas and laws were going. India on the other hand had regionalism which could go differently for each political system that would be developed. This political method appeared to be the best option for India since the Geography would not permit them a more central and organized political system such as the one that Han China had created. Another political difference involves the use of a language. Han China had the standard language of Mandarin which kept the civilization more together and unified as a whole. India did not have a standard language at all. They did have the use for Sanskrit but this was mainly reserved for the elite only. Again this political method kept India more apart than Han China. Both Han China and Mauryan/Gupta had the idea of a social hierarchy and the achievement of a status on that hierarchy. However the Han had less of a religious route than India in this sense. Han China had a course of study for all students known as the civil service exam. The passing of this exam would ensure and/or determine a student’s position in the government. India would have a religiously political setup where there would be a change in social status through reincarnation. At another point both Han China and India used religion in a way to help their political control. Han china’s political method underwent Confucianism which would allow everyone to have a good picture in their heads of a world that can be unified so as long as they follow their duties and follow an individual sort of role all the while. India had Hinduism as a form of political control. As it became popular under the Guptas, Hinduism was made the main religion which in itself unifies the people under one single religion. Han China was overall stronger when it came to that of political organization and the use of a standard language to keep the people unified. India still kept up similar characteristics with regionalism and Sanskrit but was not as strong. Both still had evened ideas to do with rising in social status and ensuring political control through religion.

Second Foundation 22. The Answer that was True

An unlocated room on an unlocated world! And a man whose plan had worked. The First Speaker looked up at the Student, â€Å"Fifty men and women,† he said. â€Å"Fifty martyrs! They knew it meant death or permanent imprisonment and they could not even be oriented to prevent weakening – since orientation might have been detected. Yet they did not weaken. They brought the plan through, because they loved the greater Plan.† â€Å"Might they have been fewer?† asked the Student, doubtfully. The First Speaker slowly shook his head, â€Å"It was the lower limit. Less could not possibly have carried conviction. In fact, pure objectivism would have demanded seventy-five to leave margin for error. Never mind. Have you studied the course of action as worked out by the Speakers' Council fifteen years ago?† â€Å"Yes, Speaker.† â€Å"And compared it with actual developments?† â€Å"Yes, Speaker.† Then, after a pause- â€Å"I was quite amazed, Speaker.† â€Å"I know. There is always amazement. If you knew how many men labored for how many months – years, in fact – to bring about the polish of perfection, you would be less amazed. Now tell me what happened – in words. I want your translation of the mathematics.† â€Å"Yes, Speaker.† The young man marshaled his thoughts. â€Å"Essentially, it was necessary for the men of the First Foundation to be thoroughly convinced that they had located and destroyed the Second Foundation. In that way, there would be reversion to the intended original. To all intents, Terminus would once again know nothing about us; include us in none of their calculations. We are hidden once more, and safe – at the cost of fifty men.† â€Å"And the purpose of the Kalganian war?† â€Å"To show the Foundation that they could beat a physical enemy – to wipe out the damage done to their self-esteem and self-assuredness by the Mule.† â€Å"There you are insufficient in your analysis. Remember, the population of Terminus regarded us with distinct ambivalence. They hated and envied our supposed superiority; yet they relied on us implicitly for protection. If we had been ‘destroyed' before the Kalganian war, it would have meant panic throughout the Foundation. They would then never have had the courage to stand up against Stettin, when he then attacked; and he would have. Only in the full flush of victory could the ‘destruction' have taken place with minimum ill-effects. Even waiting a year, thereafter, might have meant a too-great cooling off spirit for success.† The Student nodded. â€Å"I see. Then the course of history will proceed without deviation in the direction indicated by the Plan.† â€Å"Unless,† pointed out the First Speaker, â€Å"further accidents, unforeseen and individual, occur.† â€Å"And for that,† said the Student, â€Å"we still exist. Except- Except- One facet of the present state of affairs worries me, Speaker. The First Foundation is left with the Mind Static device – a powerful weapon against us. That, at least, is not as it was before.† â€Å"A good point. But they have no one to use it against. It has become a sterile device; just as without the spur of our own menace against them, encephalographic analysis will become a sterile science. Other varieties of knowledge will once again bring more important and immediate returns. So this first generation of mental scientists among the First Foundation will also be the last – and, in a century, Mind Static will be a nearly forgotten item of the past.† â€Å"Well-† The Student was calculating mentally. â€Å"I suppose you're right.† But what I want you most to realize, young man, for the sake of your future in the Council is the consideration given to the tiny intermeshings that were forced into our plan of the last decade and a half simply because we dealt with individuals. There was the manner in which Anthor had to create suspicion against himself in such a way that it would mature at the right time, but that was relatively simple. â€Å"There was the manner in which the atmosphere was so manipulated that to no one on Terminus would it occur, prematurely, that Terminus itself might be the center they were seeking. That knowledge had to be supplied to the young girl, Arcadia, who would be heeded by no one but her own father. She had to be sent to Trantor, thereafter, to make certain that there would be no premature contact with her father. Those two were the two poles of a hyperatomic motor; each being inactive without the other. And the switch had to be thrown – contact had to be made – at just the right moment. I saw to that! â€Å"And the final battle had to be handled properly. The Foundation's fleet had to be soaked in self-confidence, while the fleet of Kalgan made ready to run. I saw to that, also!† Said the Student, â€Å"It seems to me, Speaker, that you†¦ I mean, all of us†¦ were counting on Dr. Darell not suspecting that Arcadia was our tool. According to my check on the calculations, there was something like a thirty percent probability that he would so suspect. What would have happened then?† â€Å"We had taken care of that. What have you been taught about Tamper Plateaus? What are they? Certainly not evidence of the introduction of an emotional bias. That can be done without any chance of possible detection by the most refined conceivable encephalographic analysis. A consequence of Leffert's Theorem, you know. It is the removal, the cutting-out, of previous emotional bias, that shows. It must show. â€Å"And, of course, Anthor made certain that Darell knew all about Tamper Plateaus. â€Å"However- When can an individual be placed under Control without showing it? Where there is no previous emotional bias to remove. In other words, when the individual is a new-born infant with a blank slate of a mind. Arcadia Darell was such an infant here on Trantor fifteen years ago, when the first line was drawn into the structure of the plan. She will never know that she has been Controlled, and will be all the better for it, since her Control involved the development of a precocious and intelligent personality.† The First Speaker laughed shortly, â€Å"In a sense, it is the irony of it all that is most amazing. For four hundred years, so many men have been blinded by Seldon's words ‘the other end of the Galaxy.' They have brought their own peculiar, physical-science thought to the problem, measuring off the other end with protractors and rulers, ending up eventually either at a point in the periphery one hundred eighty degrees around the rim of the Galaxy, or back at the original point. â€Å"Yet our very greatest danger lay in the fact that there was a possible solution based on physical modes of thought. The Galaxy, you know, is not simply a flat ovoid of any sort; nor is the periphery a closed curve. Actually, it is a double spiral, with at least eighty percent of the inhabited planets on the Main Arm. Terminus is the extreme outer end of the spiral arm, and we are at the other – since, what is the opposite end of a spiral? Why, the center. â€Å"But that is trifling. It is an accidental and irrelevant solution. The solution could have been reached immediately, if the questioners had but remembered that Hari Seldon was a social scientist not a physical scientist and adjusted their thought processes accordingly. What could ‘opposite ends' mean to a social scientist? Opposite ends on the map? Of course not. That's the mechanical interpretation only. â€Å"The First Foundation was at the periphery, where the original Empire was weakest, where its civilizing influence was least, where its wealth and culture were most nearly absent. And where is the social opposite end of the Galaxy? Why, at the place where the original Empire was strongest, where its civilizing influence was most, where its wealth and culture were most strongly present. â€Å"Here! At the center! At Trantor, capital of the Empire of Seldon's time. â€Å"And it is so inevitable. Hari Seldon left the Second Foundation behind him to maintain, improve, and extend his work That has been known, or guessed at, for fifty years. But where could that best be done? At Trantor, where Seldon's group had worked, and where the data of decades had been accumulated. And it was the purpose of the Second Foundation to protect the Plan against enemies. That, too, was known! And where was the source of greatest danger to Terminus and the Plan? â€Å"Here! Here at Trantor, where the Empire dying though it was, could, for three centuries, still destroy the Foundation, if it could only have decided to do so. â€Å"Then when Trantor fell and was sacked and utterly destroyed, a short century ago, we were naturally able to protect our headquarters, and, on all the planet, the Imperial Library and the grounds about it remained untouched. This was well-known to the Galaxy, but even that apparently overwhelming hint passed them by. â€Å"It was here at Trantor that Ebling Mis discovered us; and here that we saw to it that he did not survive the discovery. To do so, it was necessary to arrange to have a normal Foundation girl defeat the tremendous mutant powers of the Mule. Surely, such a phenomenon might have attracted suspicion to the planet on which it happened- It was here that we first studied the Mule and planned his ultimate defeat. It was here that Arcadia was born and the train of events begun that led to the great return to the Seldon Plan. â€Å"And all those flaws in our secrecy; those gaping holes; remained unnoticed because Seldon had spoken of ‘the other end' in his way, and they had interpreted it in their way.† The First Speaker had long since stopped speaking to the Student. It was an exposition to himself, really, as he stood before the window, looking up at the incredible blaze of the firmament, at the huge Galaxy that was now safe forever. â€Å"Hari Seldon called Trantor, ‘Star's End,'† he whispered, â€Å"and why not that bit of poetic imagery. All the universe was once guided from this rock; all the apron strings of the stars led here. ‘All roads lead to Trantor,' says the old proverb, ‘and that is where all stars end.' â€Å" Ten months earlier, the First Speaker had viewed those same crowding stars – nowhere as crowded as at the center of that huge cluster of matter Man calls the Galaxy – with misgivings; but now there was a somber satisfaction on the round and ruddy face of Preem Palver – First Speaker. [1] All quotations from the Encyclopedia Galactica here reproduced are taken from the 116th Edition published in 1020 F.E. by the Encyclopedia Galactica Publishing Co., Terminus, with permission of the publishers.

Modern history of JAPAN

Distinct features of constitution: 1.According to Meiji constitution, all political power is in the Emperor’s hand. 2.The principle that sovereignty resided in person of the Emperor, by virtue of his divine ancestry â€Å"unbroken for ages eternal†, rather than the people, No other have chance to take position 3.The Emperor, nominally at least, united within himself all three branches (executive and legislative and judiciary) of government, albeit subject to the â€Å"consent of the Imperial Diet†. 4.Sacred and inviolable†, a formula which was construed by hard-line monarchists to mean that emperor retained the right to withdraw the constitution, or to ignore its provisions. 5.The Emperor’s commands (including Imperial Ordinance, Edicts, Rescripts, etc) had no legal force within themselves, but required the signature of a â€Å"Minister of State†. 6.The Emperor also had the sole rights to make war, make peace, conclude treaties Democracy in Meiji constitution. People’s right 1. Freedom of speech, assembly and association 2. Privacy of correspondence 3. Private property 4. Freedom of movement 5. Freedom of religion 6. Right to be appointed to civil or military or any other public offices equally. Moreover, according to constitution, the Emperor’s commands (including Imperial Ordinance, Edicts, Rescripts, etc) had no legal force within themselves, but required the signature of a â€Å"Minister of State†. Depart from Democracy. 1 All political powers in the Emperor’s hand. 2 The Meiji Constitution was founded on the principle that sovereignty resided in person of the Emperor, by virtue of his divine ancestry â€Å"unbroken for ages eternal†, rather than the people 3 The Emperor, nominally at least, united within himself all three branches (executive and legislative and judiciary) of government, 4 Ministers of State were appointed by (and could be dismissed by) the Emperor alone, and not by the Prime Minister or the Diet. 5 The Emperor also had the sole rights to make war, make peace, conclude treaties

The Rise and Fall of Andrew Johnson Research Paper

The Rise and Fall of Andrew Johnson - Research Paper Example He was also the only southern senator who remained loyal to the movement during the US civil war. He was inaugurated as the Vice president of united stated in 1865 and six weeks later, the president was murdered. His first obligation as the president was to ensure that the south was drawn back to the union as he clashed with Radical republicans. The Congress impeached him in 1868, but he survived and remained in power. It is said that this was the key reason why he opted not to run for the second term in office. Early Life Andrew Johnson was born in a log cabin in Raleigh on 29 December 1808 in North Carolina (Venezia, 23). His mother was Mary â€Å"Polly† McDonough Johnson and was married to a porter at an inn by the name of Jacob Johnson who is the father of Johnson. He died while Johnson was 3years old. This situation made him grow up in an impoverished situation which made him not to attend school, but in his early teen, he was an apprentice to a tailor (Venezia, 23). He m oved to Greenville Tennessee in 1826 where he managed to be an established tailor. He got married in 1827 to Eliza McCardle who was a daughter to a shoemaker. The two had a family, which comprised of five children. His wife managed to tutor him in learning writing skills and rudimentary reading at the same time learning some math. In time, he was able to prosper in life, and he bought properties including several slaves who worked in his home. Political Life Johnson’s political journey started in 1829 after he became an alderman in Greenville through an election. It was in this year that fellow Democrat and Tennessean, Andrew Jackson was elected the seventh president of the United States. The two of them considered themselves as champions of the common people. He was angry with the rich planters and he always favored the policies and rights of the populists (Gordon-Reed, 45). Since he was a skilled orator, he was given the position of the Greenville’s mayor in 1834 and the following year marked his election to the Tennessee state legislature. He served for in the 1830s and early 1840s and in 1843, he was elevated again and joined the U.S. House of Representatives (Gordon-Reed, 45). He championed the introduction and passing of the Homestead Act, which granted the settlers the mandate of acquiring undeveloped public land. This act was passed in 1862. During his time in the congress, the slavery issue was a crucial issue and majority of the Americans were divided on this issue. There are individuals who were interested in giving an extension to the peculiar institution, which was seen to be on newly acquired territories in the west while others were gravely against it. Since Johnson was a strong supporter of the constitution, he believed that people had the right of owning slaves. He became the Governor of Tennessee in 1853 after he had left the congress (Stewart, 27). In 1857, he vacated the seat of governorship to join the US Senate. He continued to push for the slave ownership in 1850s even as the country was divided between the South and the North. This struggle led to the Southern leaders to call for secession, but he still remained remorseful and wanted them to retain and preserve the union. Johnson and the Civil War The whole ideology is traced back to 1860 after the Abraham Lincoln was elected the president, and was believed to be a strong anti-slavery advocate together with his party members. The same year, the

Critical Evaluation of Network Diversity and Benefits in Innovation Essay

Critical Evaluation of Network Diversity and Benefits in Innovation - Essay Example Network structure Woolcock and Narayan (2000) develop their considerations, considering social capital as a potential bridge among policymakers, practitioners and scholars. In case people generate a positive atmosphere of cooperation, they are able to continue their relations in a favorable atmosphere. Social capital is a social bond among different networks. The main goal for people in terms of any social network is to find and sustain the development and support of their social activities (Fukuyama, 1995). The concepts of socializing and economic performance are closely related and there is a need to anchor bounds between these two concepts. Under conditions of networks creation, people are able to develop different behavioral templates and be focused on their mutual cooperation and common goals succeeding (Lee, 2009). Social interaction can be considered from a different prospect, when closed networks are acting against other social groups. For example, activities of mafias and di fferent aspects of corruption can be positioned as negative outcomes of closed networks. Shumpeter- social capital and resource combinations Social capital for Shumpeter is activity of people, directed on innovations development. Moreover, the scientist was not focused on the goal of enrichment as a final goal of innovations implementation. The goal of commercialization may not always correlate with the goal of innovations (Fukuyama, 1995). . Different spheres of human activities are connected with innovations and it is hard to claim that the final goal for social capital activities is enrichment. Social capital combines its efforts in order to develop its knowledge, to develop and introduce more valuable and innovative policies in the field of activity (Fukuyama, 1995). He was also focused on â€Å"combinatory† activity, when the members of social groups acted like entrepreneurs, while performing â€Å"the entrepreneurial function†. In these terms Schumpeter considere d possible ways for innovations and long-term economic change. Schumpeter was focused on a dynamic approach for economic development, because only through innovations it was possible to reach success. Mutual interaction of entrepreneurs and the combination of their efforts in the field of innovations could result in creation of new opportunities (Schumpeter, 1970). At first, Schumpeter was focused on the individual role of the entrepreneur, which should be innovative and motivate the team of an entrepreneur to creation of new ideas. The main role of the entrepreneur was to correctly combine innovative practices and ideas of the members of his team. Further on, Schumpeter was focused on the important role of the team as the leading moving force of the company’s progress. The entrepreneur performed a function of a new combinations’ manager (Schumpeter, 1970). . Innovations of a social group are considered to be a routine practice, while the entrepreneur should constantly be focused on â€Å"new commodity or producing an old one in a new way, by opening up a new source of supply of materials or a new outlet for products, by reorganizing an industry and so on† (Schumpeter 1970, p. 132). A â€Å"large corporations† is working in the name of a common goal. Concept of social capital-diversity In the modern globalized world the limits of the society are blurred. Still, it is evident that the concept of social c

Pop Culture icon about Superman Essay Example | Topics and Well Written Essays - 1500 words

Pop Culture icon about Superman - Essay Example Superman originated from Krypton where he was conceived but he was sent to earth before he could be â€Å"delivered† from the incubation chamber and he was the sole survivor from the doomed planet. Superman was then â€Å"born† on earth as his parents the Kents found him in a field and adopted him, he was named Clark Kent, as he grew up he discovered his superpowers and origins and he decide to use his powers for the good of mankind. When he was first introduced to Action comics he became an instant hit, this because prior to his appearance, there had been very few costumed crime fighters and definitely none with a superhuman abilities. His predecessors like the phantom got their powers from being physically stronger and smarter than their villains as well as sometimes incredible coincidences contrived by their creators to keep them winning all the time. The arrival of superman was therefore a refreshing change since audiences could read about impossible feats and not f eel cheated since the hero had superhuman powers after all. Nevertheless, the very nature of- superman was a source of controversy and criticism from the onset and which have persisted even today, by virtue of his kryptonite heritage, he is omnipotent by earth’s standards and impervious to any physical danger known to man (Shannon). He is immune to bullets, solar radiation, he has the strength to stop fling rockets lift buses and he can virtually achieve any physical feat without breaking a sweat. However in literature and film, suffering provides the key to sympathy and by extension identification all which are hard to come by in a character that can escape any foe and is virtually incapable of suffering at least in the physical sense. Nevertheless, this criticism wasn’t so apparent in the onset owing to the euphoria of a superhero character, in fact the idea of a perfect savior stuck a cord with the post-world war two audiences who probably appreciated the fantasy of a morally incorruptible sentinel who could watch over the world and vanquish any forces of evil. When the first superman movie came out in 1978, it was a resounding success in regard to direction and cultural programming, for the first time, in a long time the film audiences encountered a protagonist who want unlikeable and deeply flawed. Prior heroes included the likes of Michael Corleone and Randal Murphy and other antihero-like protagonists who were just as much villains as they were heroes. His appeal was added to by the fact that there had not been, before him a character powerful enough to stop trains and pick up buses with his bare hands. He is however vulnerable to Kryptonite radiation and magic, his power although superhuman is not infinite and when he flies off to space he has to fill his lungs with air otherwise he would suffocate. Superman’s inflexible moral compass that drives him to use his powers for the sake of other has been touted as one of the appeals of t he superman films and cartoon as it was seen to impart moral virtues in young viewers who were likely to model superman. Nonetheless, with time, the magic appeal of superman begun to fade and chinks started

Entrepreneurial Crime and the Sarbanes-Oxley legislation Essay

Entrepreneurial Crime and the Sarbanes-Oxley legislation - Essay Example National organizations have loopholes are due to geographical and spatial complexities and the fact that different cultures and legal systems are brought together (Acs & Szerb, 2007). Trade involving international players should be ethical and regulated by law. In the spirit of the Sarbanes-Oxley legislation, auditing accuracy, financial accuracy and operations between such entities and individuals must be undertaken in a clear and plausible manner to avoid fraudulent engagement (Acs & Szerb, 2007). On the contrary, the Fumitake Nishi, a former employee of the Tile Shop Holdings, Inc., and brother-in-law of the Company CEO colluded with another Chinese company where he was a majority shareholder to indulge in multiple practices that were unethical and fraudulent (Anderson, 2014). Even though, the audit did not reveal any substantial embezzlement of company funds, the vendor relationships and sourcing practices were unethical and tantamount to a contravention of law. (Acs & Szerb, 200 7). Incentive compensation practices that the Beijing Pingxiu (BP) indulged in were detestable because they meddled in the company’s vendor practices by yielding operations that unorthodox and fraudulent (Anderson, 2014). Many funds were paid into the victim’s private bank account by the company to secure the vendor deals. The process was prohibited because it denied conventional operators business opportunity over the course of time they operated the business (Acs & Szerb, 2007).

Instruction on how to deliver a presentation about a formal proposal Coursework

Instruction on how to deliver a presentation about a formal proposal. List all steps - Coursework Example The mentors and mentees must be identified and paired with each other. The HR department should also decide on the number of participants who will take part in the project. After the identification of the participants, the guidelines will be discussed and the schedule of mentoring activities will be laid out. Furthermore, the timeline and duration of the program will be communicated. Subsequent to presenting the objectives and timeline of the program, the topics and activities that will be included will be discussed. The implementation strategies will be proposed. After acquainting the audience with the program, to further emphasize its importance, a brief discussion of the benefits that may be obtained from the mentoring activities will be conveyed. Experiences of other organizations with similar programs will be shared. Finally, the presentation will end by stating that a feedback mechanism must be employed to monitor the progress of the participants. Progress reports will be required during specified review periods (Miller, n.d.). Moreover, at the end of the presentation, it must be emphasized that there is no standard mentoring program. It should be tailored to the needs of the organization and the employees. It should be flexible enough to adapt to the needs of those involved in the

Bike renting service Essay Example | Topics and Well Written Essays - 1500 words

Bike renting service - Essay Example At the same time, survey data in 2008 Olympic Scientific Congress showed that 65.68% University students lack of exercise (). Accompanied with the increasing environmental awareness and the economic crisis, biking has become more and more the preferred method of transportation. Even disregarding the savings potential, cycling also has many health benefits. As more oxygen is intake it speeds up blood circulation; this can also prevent of brain aging. Periodic aerobic exercise consumes many calories and can affect significant weight loss as well. Moreover, due to the improvements in one’s muscle, heart and lungs, cycling aids longevity. In a recent survey by the International Health Commission, postmen live longer than any other occupation. One of the major reasons is because they often deliver letters by bike. Following these reasons, it is useful to build a bike rental service in Scarborough campus. Not only can this make the traffic more convenient but it also can protect the environment and help students stay fit. The purpose of this research was first to investigate whether the respondents would be interested in a bike renting service. Secondly, to try and find out a suitable price that could be accepted by the renters and what accessories should be afforded, to target future campaigns effectively. Furthermore, it will assess the limitations of the plan and the feasibility of the project. The purpose of this report was to carry out an independent investigation on a feasible and practical service or facility that you feel could be introduced to enhance life on Scarborough Campus. Most of the data used in this research report was primary data collected through on-line questionnaires and some interviews. The reason for this is that primary data is more suitable to research on campus service planning. Data can be collected from the target market,

Research Assignment Example | Topics and Well Written Essays - 500 words - 3

Research - Assignment Example The study involves a population of 656 care workers from 14 nursing homes in Korea (Ha et al., 2014, p. 426). The nursing homes have a capacity of more than 50 elderly residents where the administrators agree to participate in the study (Ha et al., 2014, p.426). The researchers requested the administrators to distribute the questionnaire to their care workers to ensure that the sampling process had the required authorization. The study involves a structured questionnaire survey on the identified population conducted for 14 days (Ha et al., 2014, p. 426). Clearly, the sampling process used in this context manifests simple random sampling method. There are controls on the timeframe, population characteristics, location of the sample, and capacity of the sample units. The nursing homes in Korea define the sampling frame while the 14 nursing homes in Korea with a capacity of more than 50 elderly residents defined the sampling unit (Ha et al., 2014, p. 426). Moreover, the study defines care workers from the 14 nursing homes in Korea as a sampling frame. Having established a list of population elements, the researchers selected a random sample of 504 care workers working at 14 nursing homes who agreed to participate in the study (Ha et al., 2014, p. 426). Apparently, the researchers examine the descriptive statistics of the participants. The researchers conduct the reliability and validity tests for all the structured questions. As required in simple random sampling, the researchers use a computer program, SPSS 12.0 for Windows to conduct statistical analysis on how to conduct random selection of the research subjects (Ha et al., 2014, p. 427). The research subjects include organisational support, high-performance work practices, turnover intention, and organisational commitment (Ha et al., 2014, p. 426). The sampling method used in the study is very effective.

Policing Partnership in UK Essay Example | Topics and Well Written Essays - 5500 words

Policing Partnership in UK - Essay Example 13 5. Legislations that Underpin Inter-Agency and Multi-Agency Partnership Organizations 15 6. Issues and Conflicts of Policing Partnerships: How the Police Officers Apply and Limit Authority 18 7. Conclusion 20 References 21 1. Introduction The prevention of crime and the detection and punishment of offenders, the protection of life and property and the preservation of public tranquillity are the direct responsibilities of ordinary citizens ... It is destructive both of the police and public social health to attempt to pass over to the police the obligations and duties associated with the prevention of crime and the preservation of public tranquillity. These are the obligations and duties of the public, aided by the police and not the police occasionally aided by some public spirited officer. - J Avery, Police: Force or Service, Butterworth, Sydney, 1981, p. 3. With the increased level of concentration on human security and peace keeping heightened by the call of the United Nations towards the countries that are enjoined with their movement towards global peace, the role of the national police authorities around the world also equally evolves. The changes on their responsibilities and the additional challenges on their duties have been established to make the residents of the community around the world feel safer and much convinced that they are indeed living in a well protected area.1 However, with the heightened threat to peace and security, keeping up the hopes of the people that they are indeed supported and protected by the police authorities is not that easy to establish and exactly complete as part of the policing responsibilities that the authorities in the said field need to keep. The continuing pressure on the police... Policing partnerships began to attract the attention of the law enforcers around the world during the early 1980’s. It could be observed that at the onset of the application of this particular approach to community protection and safety, the realization of the role of the police administration to protect the communities they are appointed to oversee has been re-established as a collaborative picture of different agencies working together as one unit that protects the welfare of the majority. As the level of crime and aggression among the diversified population of human society increased in rate as the 19th towards the 20th century came in, the level of concentration on preventing and catching law offenders has become a huge concern of attention for every government. UK, holding at least 45% of its population rendered to the immigrants, is considered a well diversified community that calls for serious concern for social security. With diversity present in a particular community , the more conflicting events could be expected, the more crime offences could be recorded[1]. This is the particular fact that leads to the pursuance of Policing Partnership collaboration ideas in UK. It has been well established that theoretical basis of the matter has been applied as guidelines towards the making of laws that are designed towards creating a more susceptible partnership between police agents and other staff workers from other departments of the government as well as other organizations present in the society. Â  Policing partnerships take three different forms that include the statutory, non-statutory and the community organizations. In this regard, the DH which is considered in this study stands as a primary example of policing partner in the statutory form, meaning it is an agency provisioned by the government.[1] R. Hunt, Strategic Management in Policing, in Etter and Palmer, op. cit.; A Normandeau and B Leighton, A Vision of the Future of Policing in UK, Soli citor General London, 1990.

The Importance of Truth-Telling Essay Example for Free

The Importance of Truth-Telling Essay Telling the truth is something that comes up for the majority of us in childhood. It is considered impolite to lie and when a lie was told, or you were untruthful, it was often considered a reflection of your parents’ moral attitudes. Unfortunately, we all seem to have been taught differently the exact nature of a truth or lie and the right or wrong way to use that information. In To Lie or Not to Lie? – The Doctor’s Dilemma (2007), the topic of truth versus lies by doctors specifically, is discussed. While I believe it is important for doctors to be truthful in their dealings with patients, the 5 W’s need to be explored: what and to whom is truth, how and when are doctors choices for truth-telling determined and why it is important for them to tell the truth to their patients. Truth: â€Å"conformity to fact or reality† according to the Canadian Oxford Dictionary, does not appear in society to be that concrete. From childhood we were taught about the importance of truth with the consequences of our actions meted out if we were not truthful. Often our understanding of this subject was not the same as †Johnny’s† next door and we were left with this confusing amalgamation, forced to gage for ourselves on a situational basis how much was lie or truth in any given statement. Society’s opinion on this topic therefore is varied based on our own individual ethics developed over the years. Doctors, held to far higher standards than the rest of us, are forced to play ‘God’ with their patients, although the Uncertainty principle â€Å"suggests that there is no certainty in health care, therefore no ‘absolute truth’ to reveal. ‘Truth-telling can never be achieved. † (Tuckett, 2004, p. 500). In his determinations a doctor â€Å"must be careful to distinguish the notion of ‘truth’ as ‘the way things really are’ (so-called objective truth) from that of ‘truth’ as ‘the way a person believes things to be’. † (Tuckett, 2004, p. 508). TRUTH-TELLING 3 The Importance of Truth-Telling The American College of Physicians Ethics Manual influences decision making by doctors via principles. Although these principles â€Å"do not provide ordered rules, these principles can help doctors and other health care workers to make decisions when reflecting on moral issues that arise at work. † (Gillon, 1994, p. 184). Respect for Autonomy, one of these guiding principles used in most of the decisions with long term disabilities or terminal illnesses, acknowledges a â€Å"persons right to hold views, to make choices† and to take actions†¦Ã¢â‚¬  (Shahidi, 2010, p. 590). Medical Ethics are in place to create a balance between all versions of ‘truth’ and provide structure for the relationship between doctor and patient, as well to provide guidance for the doctor and protect the rights of the patient. Because truth is not black and white like we sometimes wish to think the doctor can use this framework to foster an honest and trusting relationship with his patients. The consequences can be long lasting if the truth is not told to patients in a timely fashion or in its entirety. Illness can get away from you quickly with no chance to turn back the clock or simply the chance to make amends to facilitate a peaceful exit. Doctors deceiving patients, whether by omission or by using semi-truths, erodes trust in that relationship (Tuckett, 2004). By not being honest with a patient diagnosis they may cause the patient undue hardship as according to Mitchell, †Patients with false information or no information about their condition may unintentionally mislead other physicians involved in their treatment† (Shahidi, 2010, p. 592). Lying also strips â€Å"the patient’s ability to be autonomous and fails to show respect for persons. † While â€Å"truth-telling maintains the competent patient’s status as an adult†. (Tuckett, 2004, p. 505). TRUTH-TELLING 4 The Importance of Truth-Telling. Maintaining the patients welfare should be the primary goal of a doctor while he is determining exactly just how to address the truth-telling. One of the principles under medical ethics is ’above all do no harm’. The long lasting consequences of choosing which ‘truth’ to tell could call into question this principle. We have determined that truth is not as cut and dried as we would like it to be, but there still needs to be a focus on honesty, truthfulness, and full disclosure with doctors and their patients. Our health is a joint effort, and we need to be able to rely on and trust our medical professionals to let us know what really is happening. I believe that the least amount of harm in the long run would be in telling the complete truth, however I understand that we are all different and our situations are different and it then stands to reason that the solutions will all be different as well. By keeping in mind the who, what, where, when, why and even how, I think the acquisition of this information would give the best answer to each truth-telling situation.

Multi-objective Optimization Mathematical Model

Multi-objective Optimization Mathematical Model CHAPTER 3 PRODUCTION COST WORK INJURY LEVEL MODELLING 3.1 Introduction This chapter describes a multi-objective optimization mathematical model with decision variables and constraints on them. Section 3.2 presents the model formulation with aim to minimize the total production cost and work injury level particularly in a manufacturing industry over a planning horizon. Section 3.3 presents [ZC1]the case study drawn from literature to validate the proposed model. Section 3.4 presents the method to calculate the work injury cost with consideration of work injury level factor. Section 3.5 gives the summary for this chapter. Model formulation The traditional production planning model is a mathematical optimization model. In such a model, the objective function is the total cost, and the decision variable refers to production quantity, inventory quantity, and outsourcing quantity. The constraint function in the traditional production planning model includes the demand in a planning horizon. In the work of (Xu, 2015), the traditional model includes the work injury cost. The expansion of the model hence mentions the description of the objective function and constraints. The model aims to achieve the two objective are: Objective 1 (ob1): Minimize production cost (CP). Objective 2 (ob2): Minimize work injury level (WIL). Model Assumptions A mathematical model herein is developed on the following assumptions are: The values of all parameters are certain over the next period t in planning horizon. Actual labor levels, working hours and warehouse capacity in each period cannot exceed their respective maximum levels. The number of workers and tasks are the same over the planning horizon. A single type of product is manufactured over the planning horizon. Trivial solutions will be ignored. Model Notations The following notations are used after reviewing the literature and considering practical scenarios (Wang Liang, 2004; Masud Hwang, 1980; Wang Fang, 2001; Chakrabortty Hasin, 2013). t: the time period (t=1, 2, 3, à ¢Ã¢â€š ¬Ã‚ ¦, n). CMR: the regular unit material cost of the product ($/unit). CMO: the overtime unit material cost of the product ($/unit). Pt: the number of products fabricated (production quantity) during the regular working hours in the period t (unit). Ot: the number of products fabricated (overtime production quantity) during the overtime in period t (unit). CLR: the regular unit labor cost in period t ($/unit). CLO: the overtime unit labor cost in period t ($/unit). Ht: the regular working man-hour required in period t (man-hour). Et: the overtime working man-hour required in period t (man-hour). CI: the unit inventory cost ($/unit). It: the units of product to be left over as an inventory during period t (unit). CWI: total work injury cost over the planning horizon.[C2] [aa3] It-1: the units of leftover products in the previous period of t. dt: the product demand in period t. D: the total demand over the planning horizon. dn: the number of working days in period t. W :the number of employees. E* : allowable overtime hours in period t. Objective function (ob1) To achieve the ob1, the integrated production planning was used in order to minimize the production cost. The total production cost consists of the material cost, labor cost, inventory cost and work injury cost. Let C represent various costs. The total cost is hence denoted by: (3.1) [ZC4] where Cproduction: the total production cost. Cmaterial: the material cost. Clabor: the labor cost. Cinventory: the inventory cost. CWI: work injury cost. where Material Cost: Material cost is the sum of regular material cost and overtime material cost that includes the raw material cost and overhead cost. Raw material directly contributes to the finished product, and the overhead cost includes the utility cost such as electricity, gas and rent etc. Labor Cost: Labor cost is the sum of all wages paid to employees for the production of products in both regular time and overtime hours. Inventory cost: Inventory cost is the holding cost of products in stock. Work injury cost: the work injury cost caused by the repetitive assembly production over an entire production period The first objective function (ob1) of the model is to minimize the cost of production (eq. 3.2). (3.2) (3.3) Moreover, equation 3.1 can be written as: [ZC5][aa6] Where, the first part of equation 3.3, represents the regular material cost (CMR) incurred on the regular production quantity (Pt) and overtime material cost (CMO) on overtime production quantity (Ot) over the planning period. The second part represents the labour cost (workers salary) and it is the combination of the regular unit labor cost (CLR) during regular working hours (Ht) and the overtime unit labor cost (CLO) in overtime working hours (Et). The third part is the unit inventory cost for left over products as an inventory over the period (It) and the final part denotes the accumulated work injury cost (CWI) during regular working man-hour (Ht) and the overtime working man-hour (Et). Furthermore, the Cwiis calculated on a yearly basis with 21.74 working days in a month and 8-hour shift as per the study by Lin. (2008). It can be seen in equation (). (2) Objective function (ob2) The second objective function (ob2) of the modelis to minimize the work injury levels over the planning horizon as shown below; Furthermore Where, equation () represents the accumulated work injury level (WIL) during regular working man-hour (Ht) and the overtime working man-hour (Et) in the time period t. As discussed in literature that increase in regular and overtime production quantity will increase the work injury level because of long exposure of worker to the repetitive task. Therefore, higher the production quantity, the longer the working hours and the higher the work injury level. Overall objective function Decision variables The decision variables in the above model are explained below: Production quantity (Pt) during the regular working time in period t. Overtime production quantity (Ot) in period t. Number of products in inventory (It) in period t. Dependant variables Regular working man-hour (Ht) required in period t. Overtime working man-hour (Et) required in period t. 3.2.3 Constraints Demand constraint (3.4) (3.4) Where, the sum of regular production quantity (Pt), overtime production quantity (Ot) and inventory levels essentially greater than or equal to the market demand (dt) in a period t as shown in equation 3.4. Moreover, the sum of all periods demand (dt) should be greater than or equal to total demand (D) over planning horizon as shown in equation 3.4. Labor hour limit constraint. (3.5) where, equation (3.5) represents the regular working man-hour (Ht) in period t should be less than or equal to 8 hours per day, monthly working days (dn) as well as number of employees (W). Overtime working man-hour (Et) should not exceed the allowable hours (E*) by law. Production rate constraint. Assume that the unit time is one hour, and the relation between the produced units and labor can be expressed as: (3.6)[C7] where Rh: the production rate during regular working time. Re: the production rate during overtime. Non-negative constraints. The number of produced product, the number of demand and the unit labor cost are non-negative, respectively that is: (3.7) Model implementation To validate the model efficiency, the specific case study about the aggregate production planning of single product is selected. This case study is drawn from the literature and the author s own experience in industry (Chakrabortty Hasin, 2013). Case study description To validate the proposed model, the real life data of Comfit Composite Knit Limited (CCKL) is taken. The company manufactures knit ware product. The production planning is more specifically about the production of hooded jacket over a couple of months planning horizon. Table 3.1 3.2 give the monthly product demand, and related cost data are as follows. Table 3.1 Product demand over planning horizon Period (t) May June Demand (dt) (units) 1400 3000 Table 3.2 Cost data of case study Regular time unit material cost (CMR) 14 ($/unit) Overtime unit material cost (CMO) 28 ($/unit) Inventory Cost (CI) 3.5 ($/unit) Regular time unit labor cost (CLR) 8 ($/unit) Overtime unit labor cost (CLO) 12 ($/unit) . Table 3.3 Model Constraint Data: Initial Inventory level- I0 500 End inventory in period- I2 400 Labor hour (Ht 0+ Et) à ¢Ã¢â‚¬ °Ã‚ ¤ 225 man-hours Production rate (Rh) 0.033 man-hour/unit In given case study, the company makes knit ware product (Hooded Jacket). In manufacturing of product, the job requires a worker posture in a standing position to process the product on a machine. The worker need to place the product parts in a machine to stitch it , for this reason worker has to lean forward to focus on the product parts. The neck may bend to get a better view of stitching if required. To perform this task, the upper arms are need to be elevated to the height of the work table. To place the product part in a right way the body rotation is required (Fig. 3.1). 3.3 Work injury cost (Cwi) calculation Work injury cost [C8](Cwi) is calculated by using the model proposed by Lin (2008). This model is shown here (Eq. 3.8): (3.8) where CWI: the cost of work injuries; ÃŽÂ ±n: the coefficient of multiplier associated with each variable X1 to X7. X1: the type of business Manufacturing; M61; 1: Mills and Semi-medium 0: otherwise; X2: the type of business M81; 1: Metal Foundries and Mills; 0: otherwise; X3: the type of business M91; 1: Agricultural Equipment; 0: otherwise; X4: the type of business M92; 1: if it is Machine Shops, Manufacturing; 0: otherwise; X5: workers age. X6: gender; 1: if it is male; 0: otherwise; X7: the level of work injury. ÃŽÂ µ: the error term. The work injury levels of different body parts are presented in Table 3.13 (Lin, 2008). Table 3.13 Work injury level range Parts of Body Level of work injury Upper Arm 1-6 Forearm 1-3 Wrist 1-4 Neck 1-6 Trunk 1-6 Leg 1-7 The statistics software SPSS ® is used (Lin, 2008) to determine the coefficient of every variable in equation 3.8. In the first step, all data regarding each variable were redefined. In the second step, work injury cost (dependent variable) was adjusted by power transformation. Hence, the work injury cost model is expressed by the following equations (Lin, 2008). (3.9) (3.10) (3.11) (3.12) (3.13) (3.14) After the second step, Equation 3.9 to 3.14 were again adjusted to calculate the work injury cost. The manufacturing type of business is considered, therefore X1=X2=X3=0 and X4=1. It has been noticed that the age and gender coefficient were small and can be neglected. Furthermore, the equation states that work injury levels were the major part in work injury cost (Xu, 2015). The revised work injury cost model equations are as follows; (3.15) (3.16) (3.17) (3.18) (3.19) (3.20) From the above discussion, it was noticed that to calculate the work injury cost the first step is to measure the work injury level of a given posture. Moreover, in order to measure the work injury level (WIL), DELMIA ®V5 production software (Lin,2008) is used. In the first step, Human Builder tool is used for posture visualization. In the second step, posture simulation is done by using Posture Editor tool. In the last step, to measure work injury level for the particular posture RULA (Hedge, 2001) is applied. 3.5 SUMMARY In this chapter, multi objective optimization model was tailored to achieve desired objectives. First objective was to minimize the total production cost over the planning horizon with consideration of work injury cost factor. Second objective was to minimize the work injury levels over the planning horizon. In Section 3.2 multi objective optimization was made along with decision variables and constraints on them. Assumptions and notations were taken from Chakrabortty Hasin. (2013), Wang et al. (2005) and Xu. (2015). In the next Section 3.3 the case study was presented to validate the model. In Section 3.4 work injury cost calculation method was presented with its all variables and work injury level range. Thus, both objectives 1 2 mentioned in chapter 1 have been achieved by proposed model. More detail regarding the results will be discussed in next chapter.

Legal Opinion For 8th Social Studies :: essays research papers

Legal Opinion A.   Ã‚  Ã‚  Ã‚  Ã‚  I picked the side of New Jersey in the New Jersey vs. T.L.O case. The reason I picked that side is because the girl whas smoking on school grounds and she was not allowed to do that. Another reason is the teacher that found the girl smoking had the right to bring her to the Principals office, because she had a reason to. Finally the girl denied smoking, she said she didn’t smoke and she probably would of got in less trouble if she told the truth. B.   Ã‚  Ã‚  Ã‚  Ã‚  A girl was caught smoking in a shcool bathroom. A teacher caught her and took her to the Principals office to be searched. The vice-principal found more than just cigarettes, they also found rolling papers, marijuana, a pipe, a large amount of cash, and an index card with a list of student names and amounts of money owed to her. The Juvenille Court prosecuted T.L.O for drug dealing. T.L.O ploted that the search was unconstitutional and was breaking her rights under the 4th amendment. Juvenille Court still thought that it was alright to search her bag because the school had a suspicious reason for commiting a crime. The case then went to the Supreme Court, they ruled that the school by any means had the right to search T.L.O C.   Ã‚  Ã‚  Ã‚  Ã‚  The New Jersey High School had the right to search T.L.O. The Fourth Amendment say’s that nobody has the right to search someone for no reason unless there is a probable cause. For that means the school had no reason to search the girl. The law for searching in a school is different. You are allowed to search only if you have a reason. For that means the school did have a reason.   Ã‚  Ã‚  Ã‚  Ã‚  The school also had the right to search the girl, because a teacher found the girl smoking in the bathroom, It clearly says that smoking was not allowed on school grounds. On top of that the girl lied about smoking. That makes everything worse for the girl. The teacher found the girl smoking in the bathroom, but T.L.O denied it, in the search the Vice-President found cigarettes. That has got to mean she smokes. D.  Ã‚  Ã‚  Ã‚  Ã‚  If I were the opposing view I would think the search was wrong because there was no probable cause  Ã‚  Ã‚  Ã‚  Ã‚  and there was no evidence for her smoking.

Electronic Resources for Nineteenth Century Studies :: Electronics Education Essays

Electronic Resources for Nineteenth Century Studies Electronic resources in nineteenth century studies (and the humanities generally) might best be described at the moment in terms of promise and peril. I say "at the moment" because, as we all know, any statement about electronic texts that is true today may be false tomorrow. I say "promise' because, as we also know, electronic media are promising wonders that could only have been dreamed of five years ago: searchable databases of an almost inexhaustible size and variety, immediate access to colleagues and scholars around the world; webs of content, context, and hyper linked materials that connect to an almost dizzying array of information; multimedia wonders of text, image, and audio files for classroom and scholarly use. I say "peril," because as we are increasingly coming to understand, these technological wonders arrive only with several crucial caveats: Internet addresses can be here today and gone tomorrow, CD ROMs and complex Web sites are astonishingly time consuming and cost ly to produce, proprietary interests are starting to use finance as a means of controlling access to information, and hardware is developing so quickly that the septium or octium chip can only be a matter of months in the future (unless all of our desktops are replaced by Java driven hollow boxes). We have reached an important moment in scholarly and pedagogical history when these developments should neither be embraced uncritically nor ignored. I would like to take this opportunity to review a number of current electronic resources in the humanities, with nods toward other hypertexts, as a means of assessing not only the ways that these new technologies may alter our work in the coming years but also the way they may already be altering our understanding of what information is, where it comes from, and how it is transmitted. While students and scholars can currently say, "look, I have instant access to material that would have taken me months to gather in the past," they are also forced to ask two important related questions: "how accurate is this information?" and "who are the authors of this material if it was gathered or drafted by a committee, edited by other individuals, coded and linked by still others, published by a complex consortia of interests, and then subject to ongoing and immediate modifications (in the case of Web resources at least)?" Academic research and teaching will undoubtedly alter in unimaginable way s as a result of emerging technologies.

Using your Memory Better :: essays research papers

The task of learning and remembering all the different physical properties of lipids and proteins in Organic Chemistry can be an extremely challenging duty. Being an athletic-training major here at the University of Iowa, it is one of my many obligations to understand and be able to recall such properties very quickly. By using mnemonic strategies, memory aid techniques that use vivid imagery and organization devices, I am able to defeat the challenge in my Organic Chemistry class of getting all the physical properties of lipids and proteins into my Long Term Memory and then recall them whenever I need. In order for me to understand and remember the physical properties of lipids and proteins, I must first relate personal experiences to the information my professor gives. For example, by using the mnemonic strategy of relating an object to an image, also known as the â€Å"peg-word† system, I can remember things such as the structural make up of a saturated fatty acid, a long bumpy tube, versus an unsaturated fatty acid, a bent bumpy tube. Also with this mnemonic strategy, I can remember the structural make up of a Liposome by relating it to what a flower looks like. I can turn the task of remember what an Alpha- Helix protein looks like by associating it to the picture of a spring. A difficult subject to remember is easily turned into something easy by relating them to everyday symbols. This particular mnemonic strategy works extremely well for me because it associates items, such as the structure of Amino Acids, which are harder to understand with items that I can relate to in my everyday life, chains and springs. This technique puts the information I need to know and remember into my own words so to speak. It chunks the information into acronyms that I am familiar with. I am a visual learner, so this strategy is easier for me over others because I am more likely to recognize a picture and relate it to its short form. To get the information about lipids and proteins out of my Long Term Memory I have to do the task of recall, which is the ability to retrieve information not in conscious awareness. There are many ways to in which I can make retrieving information stored in my Long Term Memory easier. One is by putting myself back in the context of where I experienced what I learned. Using your Memory Better :: essays research papers The task of learning and remembering all the different physical properties of lipids and proteins in Organic Chemistry can be an extremely challenging duty. Being an athletic-training major here at the University of Iowa, it is one of my many obligations to understand and be able to recall such properties very quickly. By using mnemonic strategies, memory aid techniques that use vivid imagery and organization devices, I am able to defeat the challenge in my Organic Chemistry class of getting all the physical properties of lipids and proteins into my Long Term Memory and then recall them whenever I need. In order for me to understand and remember the physical properties of lipids and proteins, I must first relate personal experiences to the information my professor gives. For example, by using the mnemonic strategy of relating an object to an image, also known as the â€Å"peg-word† system, I can remember things such as the structural make up of a saturated fatty acid, a long bumpy tube, versus an unsaturated fatty acid, a bent bumpy tube. Also with this mnemonic strategy, I can remember the structural make up of a Liposome by relating it to what a flower looks like. I can turn the task of remember what an Alpha- Helix protein looks like by associating it to the picture of a spring. A difficult subject to remember is easily turned into something easy by relating them to everyday symbols. This particular mnemonic strategy works extremely well for me because it associates items, such as the structure of Amino Acids, which are harder to understand with items that I can relate to in my everyday life, chains and springs. This technique puts the information I need to know and remember into my own words so to speak. It chunks the information into acronyms that I am familiar with. I am a visual learner, so this strategy is easier for me over others because I am more likely to recognize a picture and relate it to its short form. To get the information about lipids and proteins out of my Long Term Memory I have to do the task of recall, which is the ability to retrieve information not in conscious awareness. There are many ways to in which I can make retrieving information stored in my Long Term Memory easier. One is by putting myself back in the context of where I experienced what I learned.

GraduateWriters.net Mission to Help Students Achieve Academic Excellence Essay

PHOENIX, AZ, JUNE 24, 2014 /PRESSRELEASEPING/ – ACADEMIC WRITING IS AN IMPORTANT ACTIVITY done by every student, at all level of education in order to satisfy course work requirement. â€Å"Students are required to undertake a variety of academic writing task that could range from short essays, assignments, SAT, IELTS or lengthy term papers, dissertations and thesis. This type of writing could be done either under time demanding pressure or syllabus requirement. As a result students are expected to output a number of papers at the end of each day, week, semester or term. But such time demanding output doesn’t always guarantee quality of resultant paper†, says Peter Wartson consultant at GraduateWriters. net. In fact a research by National Academic Council for Academic Excellence found that many students resort to borrowing or stealing the work of others in order to beat deadlines and as result the rate of plagiarism has become so common place, that if every student who plagiarized was to be flunked, the rate of dropout will be worse than that massive open online learning courses (MOOC). â€Å"With this in mind many students sort the services of freelance  academic writers, who are seen as the first level examiners. They guide students on how to structure their research papers, perform proof reading and help students to avoiding mistakes related to grammar, spelling, phrasing and plagiarism. † states Peter, â€Å"Freelance academic writers, should not be confused with people who helps students achieve shortcut by doing their assignments, no they are honest writers who guide students the way a teacher will do†. While this may help students reduce stress related to academic demand, some concerns has  been raised concerning the qualification of writers who handle students’ academic work. Mary White an academic consultant at GraduateWriters. net, stated that â€Å"Students should look at the pool of writers a freelance company has, example GraduateWriter. net, is comprised of only graduate writers who have various qualification in their field of interest that range from MSc, MBA, MRes, EM, LLM, MEng, MA, Phd, and DS. At that company, writers undergo series of test approved by our senior writers to ascertain academic prowess and professional skills in writing and research. The advantage of this pool of workforce is that clients are always guaranteed the best quality writing and editing service, which cannot be found elsewhere on the Internet. Writers are specialist, with background in Education, Medicine, Nursing, Finance, Communication, Media, Arts, Humanities, Social Sciences, Engineering, IT, Law etc. † Other qualities that prospective student should look at before selecting an academic writing company include privacy and security, originality, timeliness, quality, revision policy, orders tracking, support and response to queries. A lot of emphasis should be placed on privacy as it is not only a right but a demand that every users online should be guaranteed of. â€Å"If an online company published a student paper online, without their formal approval, it could lead to plagiarism and dismissal from school. Therefore students should look for companies that adhere with privacy policies and not let third party have access to their client papers. † articulates Peter. ABOUT GRADUATEWRITERS. NET Graduate Writers is an academic editing and writing company that help student in carrying out  research work, gives advice on writing, referencing and proof reading. The company is composed of Graduate writers with specialties in field which can be advantageous to students. PO Box 89670 Phoenix, AZ Peter Wartson Graduate Writers LLC +1-480-409-1822 support@graduatewriters. net http://graduatewriters. net Source URL: http://pressreleaseping. com/graduatewritersnet-mission-help-students-achieve-academic- excellence.

Case Study on Adidas Supply Chain

Adidas Adidas pic Type universal (AG, FWB ADS) Founded 1924 (registered in 1949)1 Founder(s) Adolf Dassler Headquarters Herzogenaurach, Ger some an(prenominal) Key popu afterward-hours Herbert Hainer (CEO), Erich Stamminger (CEO, Adidas spot), Igor Landau (Chairman of supervisory wit) (2009-) Industry Designing and Manufacturing produces Footwear, acrobatic wear , Sports equipment T vegetable oiletries Revenue 10. 799 angiotensin converting enzyme million million million ($15. 6 billion) (2008)2 run income 1. 070 billion ($1. billion) (2008)2 Profit 642 million ($933 million) (2008)2 Employees 38,980 (2008)2 electronic networksite www. adidas- theme. com Adidas AG (pronounced / di? d? s/ in US incline, FWB ADS) is a German- ground medievalimes arrange manufacturing disdain and break d accept of the Adidas Group, which consists of Reebok activewear ac community, TaylorMade-adidas golf smart set, and Rockport. Besides sports footwear, the guild too produces pick cropions much(prenominal) as bags, shirts, watches, eyewear and another(prenominal)wise sports and clothing think goods. The guild is the outsizest sportswear manufacturer in atomic number 63 and the countenance biggest sportswear manufacturer in the cranial orbit of a post, after its U. S. bear on Nike. 3 The fraternitys clothing and enclothe intentions typic eachy feature ternion twin bars, and the alike(p) motif is incorporated into Adidass advancedfound moodyicial logo. The Three Stripes were bought from the Finnish sport corporation Karhu Sports in the 1950s. 45 The comp whatsoever revenue for 2008 was listed at 10. 799 billion and the 2007 designing was listed at 10. 299 billion, or ab break US$15. 6 billion. picedit History edit Gebruder Dassler Schuhfabrik Adolf (Adi) Dassler started to produce his own sports enclothes in his mothers wash kitchen in Herzogenaurach, Bavaria, after his return from demesne state of war I. In 1924, his brother Rudolf (Rudi) Dassler joined the dividing creese which became Gebruder Dassler Schuhfabrik (Dassler Brothers Shoe Factory) and prospered.The pair started their venture in their mothers laundry, merely at the judgment of conviction, electricity supplies in the town were unreliable, and the brothers slightly quantifys had to enforce foot pedal power from a stationary oscillation to run their equipment. 6 By the 1936 Summer surpassings, Adi Dassler set from Bavaria on maven of the worlds first-class honours degree pushship adviseal to the Olympic village with a drivecase salutary of spikes and persuaded unify States sprinter Jesse Owens to use them, the first champions hip to(predicate) for an African-American. after Owens won four gold medals, his victory cemented the good reputation of Dassler shoes among the worlds around singular sportsmen. Letters from around the world landed on the brothers desks, and the trainers of other hold gr oups were all interested in their shoes. avocation boomed and the Dasslers were selling 200,000 pairs of shoes each category before introduction War II. 7 tardy in mankind War II, the shoe factory shifted to action of the Panzerschreck anti-tank weapon. 8 edit Company banking companyrupt Both brothers joined the Nazi Party, solely Rudolf was slightly juxtaposed to the party. During the war, a growth rift betwixt the pair reached a breaking point after an ally bomb attack in 1943 when Adi and his married woman climbed into a bomb shelter that Rudolf and his family were already in The dirty bastards ar stern again, Adi said, app atomic number 18ntly referring to the Allied war planes, but Rudolf was convinced his brother meant him and his family. 9 After Rudolf was subsequent picked up by American soldiers and incriminate of world a member of the Waffen SS, he was convinced that his brother had turned him in. 6 The brothers pause up in 1947,10 with Rudi weeing a refreshed firm that he cal lead Ruda from Rudolf Dassler, later re stationed Puma, and Adi forming a company formally registered as adidas AG (with lower case lettering) on 18 August 1949. The acronym All Day I Dream Ab pop out Soccer, although some meters considered the linage of the adidas telephone, was applied retroactively. The name is actually a portmanteau word formed from Adi (a family name for Adolf) and Das (from Dassler). 1 edit The Tapie affairAfter a period of trouble succeeding(a) the wipeout of Adolf Dasslers son Horst Dassler in 1987, the company was bought in 1989 by cut industrialist Bernard Tapie, for 1. 6 billion cut francs (now 243. 918 million), which Tapie borrowed. Tapie was at the date a famous specialist of rescuing bankrupt companies, an expertise on which he built his fortune. Tapie contumacious to move reapingion offshore to Asia. He as headspring hired Madonna for promotion. He sent, from Christchurch, New Zealand, a shoe gross sales re arrayative, to Ger many another(prenominal) and met Adolf Dasslers descendants (Amelia Randall Dassler and Bella Beck Dassler) and was sent back with a few items to promote the company there. pic pic A pair of Adidas Samba foot swelling trainers. In 1992, Tapie was unable to pay the interest from his loan.He mandated the Credit Lyonnais bank to sell Adidas, and the bank subsequently converted the outstanding debt owed into right of the enterprise, which was unusual as per the prevalent French banking work out. App atomic number 18ntly, the state- possess bank had tried to get Tapie out of dire financial straits as a personal favour to Tapie, reportedly because Tapie was Minister of Urban Affairs (ministre de la Ville) in the French g overnment at the time. In February 1993, Credit Lyonnais sold Adidas to Robert Louis-Dreyfus, a friend of Bernard Tapie for a much tall amount of money than what Tapie owed, 4. 485 billion (683. 514 million) francs instead than 2. 85 billion (434. 479 million).Tapie later sued the bank, because he felt spoiled by the confirming sale. Robert Louis-Dreyfus became the juvenile CEO of the company. He was as well the president of Olympique de Marseille, a team Tapie had owned until 1993. Tapie filed for personal bankruptcy in 1994. He was the object of some(prenominal) lawsuits, notably related to match fixing at the soccer corporation. During 1997, he served 6 calendar months of an 18 month prison sentence in La Sante prison in Paris. In 2005, French courts awarded Tapie a 135 million pay (about 886 million francs). edit Post-Tapie time In 1994, unite with FIFA Youth Group, SOS Childrens Villages became the main beneficiary.In 1997, Adidas AG acquired the Salomon Group who alter in go wear, and its official corporate name was swapd to Adidas-Salomon AG because with this erudition Adidas in addition acquired the Taylormake Golf company and Maxfli which allowed them to compete with Nike Golf. In 1998, Adidas sued the N CAA over their rules curb the size of it and number of commercial give-and-take on team uniforms and do. Adidas withdrew the suit, and the two groups effected guidelines as to what three-stripe designs would be considered uses of the Adidas trademark. In 2003, Adidas filed a lawsuit in a British court challenging Fitness World Tradings use of a two-stripe motif akin to Adidass three stripes. The court ruled that contempt the simplicity of the mark, Fitness World s use was infringing because the public could establish a link amidst that use and Adidass mark. 11 In September 2004, top slope style designer Stella McCartney launched a joint-venture line with Adidas, establishing a immense- experimental condition coadjutorship with the corporation. This line is a sports cognitive affect collection for women called Adidas by Stella McCartney,12 and it has been decisively acclaimed. 13 Also in 2005, on 3 May, Adidas told the public that they sold their partner company Salomon Group for 485m to Amer Sports of Finland. In August 2005, Adidas say its intention to buy British rival Reebok for $3. 8 billion (US). This takeover was consummate with partnership in January 20061 and meant that the company giveing support fear sales closer to those of Nike in North America.The acquisition of Reebok will to a fault allow Adidas to compete with Nike cosmopolitan as the number two gymnastic shoemaker in the world. 14 Adidas has corporate render in Germany, and many other personal credit line reparations around the world much(prenominal)(prenominal)(prenominal) as Hong Kong, Toronto, Taiwan, England, Japan, Australia and Spain. Mainly sold in the U. S. , Adidas makes a good come up to of assets from these countries and is expanding to to a peachyer extent oversea countries. In 2005, Adidas introduced the Adidas 1, the first ever production shoe to give a micro demonstrateor. Dubbed by the company The Worlds eldest Intelligent Shoe, it features a micr o operationor receptive of do 5 million calculations per second that automatically adjusts the shoes direct of cushioning to suit its environment.The shoe requires a small, user-re spatial relationable battery that lasts for round 100 hours of running. On 25 November 2005, Adidas released a new version of the Adidas 1 with an deviate magnitude range of cushioning, allowing the shoe to become softer or firmer, and a new motor with 153 portion much torque. citation demand On 11 April 2006, Adidas announced an 11- division deal to become the official NBA apparel impartr. They will make NBA, NBDL, and WNBA jerseys and products as rise as team-coloured versions of the Superstar basket twine shoe. This deal (worth over $400 million) takes the place of the front 10-year Reebok deal that was put in place in 2001. edit harvests edit RunningAdidas diddlely manufactures several running shoes, including the adiStar guard 5, the adiStar Ride (the switching for the adiStar Cushion 6), the Supernova Sequence (the replacement for the Supernova Control 10), and the Supernova Cushion 7 (which will incumbently be replaced by the Supernova Glide), among others. In addition, their surgical procedure apparel is widely employ by runners. Adidas excessively uses kangaroo leather to make their much expensive shoes. 1516 edit Association football game bingle of the main tensiones of Adidas is football kit and associated equipment. Adidas besides provides apparel and equipment for all teams in study league Soccer. Adidas remain a major company in the preparedness of team kits for worldwide football teams. Current examples accommodate Russia, France, Germany, Greece, Romania, Argentina, Spain, Mexico, South Africa, Japan and Nigeria.Adidas as well makes lector kits that are use in planetary competition and by many countries and leagues in the world. In the United States, lecturers wear the Adidas kits in MLS matches even though the primal referee p rovider is Official Sports. The company has been an pioneer in the area of footwear for the sport with notable examples including maturation of the Copa Mondial moulded boot used for matches on firm dry pitches for almost forty years. The studded equivalent was named World Cup follow in jubilation of the 1978 tournament won by Argentina, one of the nations it supplied at the time. A few of the famous club football teams of hich are currently sponsored by Adidas are Real Madrid, Chelsea, River Plate, Liver puss, Marseille, Universidad de Chile, Bayern Munich, Schalke 04, Benfica, Milan, Wolfsburg,Galatasaray,Panathinaikos, and Palmeiras, among others. Adidas became famous for advancing the Predator boot design develop by ex-Liverpool and Australian inter depicted object worker Craig Johnston. This design featured a ribbed rubber grammatical construction for the top(prenominal) leather of the shoe, used to accent the move of the ball when struck gamely trained players claim ed they were able to curve the flight of the ball much easily when wearing this new contoured design. citation neededThe Predator also features the Craig Johnston-invented Traxion sole.FIFA, the world administration body of football, commissioned specially de subscribe footballs for use in its own World Cup tournaments to favour much fight play. The balls supplied for the 2006 World Cup were particular noteworthy for their ability to travel further than introductory types when struck, leading to longer range conclusion strikes that were intended to remove magnitude the number of goals scored. Goalkeepers were believed to be less comfortable with the design, claiming it would move squarely and unpredictably in flight. edit Tennis Adidas has sponsored lawn tennis players and recently introduced a new line of tennis racquets. While the Feather is do for the regular player, and the Response for the club player, Adidas targets the tournament player with the 12. 2 oz Barricade tour mystify. 17 Adidas sponsors the following captain players Jo-Wilfried Tsonga, Dinara Safina, Ana Ivanovic, Daniela Hantuchova, Andy Murray, Fernando Verdasco, Gilles Simon, Marcos Baghdatis, Fernando Gonzalez, Marat Safin, and upcoming players like Melanie Oudin, Sorana Cirstea and Grigor Dimitrov. Adidas tennis apparel contains the ClimaCool technology found in other athletic jerseys and shoes. 18 In Cincinnati, at the adenosine triphosphate Tennis Tournament in Mason, they live also sponsored the ball-boy and ball-girl uniforms. edit Golf In 1997, Adidas purchased TaylorMade. The moving-picture show and cerebrate of TaylorMade was redirected shortly after the acquisition to take over the driver securities industry. The company succeeded in achieving this goal in late 2004 when it officially became the No. 1 driver in golf.On 14 October 2008, Adidas, finished its subsidiary TaylorMade, acquired Ashworth for $72 million, assuming $46. 3 million in debt. 19 edit play In the 1990s, Adidas signed the world No. 1 batsman Sachin Tendulkar and do shoes for him. 1 He is still wearing Adidas shoes when he plays matches. Adidas even made action figures after Sachin Tendulkar. In 2008, Adidas made their move into English play market by sponsoring English batting star Kevin Pietersen after the cancellation of his animation deal with Woodworm, when they ran into financial difficulties. 20 The following year they signed up fellow England player Ian Bell and Indian Player Ravindra Jadeja.Having made cricket footware for many years, the company ultimately entered the field of bat manufacture in 2008 and their products are acquirable in the Incurza, Pellara and Libro ranges Adidas also manufactures the uniforms worn by some(prenominal) the England cricket team and the Australian cricket team. In 2008 and 2009 in both(prenominal) the seasons of the Indian post-mortem League (IPL), it took up the sponsorship of the Mumbai Indians and the Delhi Daredevils . In 2009, Adidas signed Sachin Tendulkar and started sponsoring his bat. It created a new bat Adidas ST for him and Adidas KP for Kevin Pietersen, the same year. Now both of them use their personalized bats in cricket. edit Basketball Adidas has been a longtime basketball game shoe manufacturer and is one of the leading basketball brands in the world. They are most famous for their iconic Superstar and Pro Model shoes, dear know as shelltoes for their stylized dense rubber toe box.These were made real popular in the 1980s hip hop streetwear scene onside Adidas stripe-sided polyester suits. Adidas is also the current outfitter of all 30 franchises in the depicted object Basketball Association (replacing the Reebok brand after the merger) and sponsors numerous players past and present like Kareem Abdul-Jabbar and Tracy McGrady, as well as Dwight Howard, Chauncey Billups, Derrick Rose, Kevin Garnett, Michael Beasley, Josh Smith, Tim Duncan, and Candace Parker. edit L crosswayse In 2007, Adidas announced the prox production of lacrosse equipment, and will sponsor the Adidas case Lacrosse Classic in July 2008 for the top 600 high school underclassmen lacrosse players in the United States. 21 edit rugger Adidas make rugby balls and other rugby gear. They are the current kit and ball supplier to the New Zealand All Blacks, Irish Munster Rugby, and the Argentinian Pumas, among others. edit Gymnastics Since 2000, adidas has provided mens and womens gymnastics wear for Team regular army, with USA Gymnastics. In 2006, adidas gymnastics leatards for women and adidas mens comp shirts, gymnastics drawers and gymnastics shorts have been forthcoming in the USA, with seasonal leotards offered for Spring, Summer, Fall and Holidays. start in 2009, adidas gymnastics wear has been available worldwide through GK Elite Sportswear. 22 edit skateAdidas SB (Skateboarding) are shoes made specifically for skateboarding. umpteen of the shoes Adidas previously made w ere redesigned for skateboarding. edit Accessories Adidas also designs and makes watches, eyewear, bags, baseball caps, and socks. pic pic Adidas perfumed Impact Limited Edition As well, Adidas has a branded range of potent and female deodorants, perfumes, aftershave and lotions. edit Marketing Adidas, like other sports brands is believed to engender high consumer brand loyalty. Brand loyalty towards Adidas, Nike and several other sportswear brands was examined in a recent study. 23 The study found consumers did not exhibit unduly high loyalty towards such brands.During the middle to late 1990s, Adidas divided the brand into three main groups with each a separate cerebrate Adidas mathematical knead was designed to bear their devotion to the athlete Adidas Originals was designed to focus on fashion and livelihood-style and name Essentials, with the main group deep down this one being Y-3. Im realistic is Nothing is the current mainstream merchandise slogan for Adidas. Thi s campaign was real by 180/TBWA based in Amsterdam but also with significant work being through by TBWA/Chiat/Day in San Francisco particularly for its basketball campaign Believe In fiver. TBWAChiatDay commissioned Zane Peach24 to produce images for 2007 inter issue ad campaign. edit Sponsorship Main article List of Adidas sponsorships Adidas are the main sponsor and kit supplier of the highly palmy New Zealand national rugby team, the All Blacks.Adidas also are the kit supplier to the Argentina Pumas, to the French Stade Francais, and the Irish Munster Rugby team and the United States Eagles. Adidas are the main sponsors and kit sponsors of the successful Australian Cricket Team and the England Cricket Team. They are also the main sponsors of the Indian cricketers Sachin Tendulkar and Virender Sehwag and English cricketers Kevin Pietersen and Ian Bell. Adidas are the main sponsors of Australian Domestic Cricket Competitions Pura Cup, KFC Twenty20 Big Bash, cut through Ranger unmatched Day Cup. They are sponsors of the Indian Premier League teams Delhi Daredevils and Mumbai Indians. Adidas also sponsors and produces apparel for the Gold Coast Titans rugby league clubs in the Australian National Rugby League (NRL) competition.Adidas is the longstanding kit provider to the Germany national football team, a sponsorship that began in 1954 and is contracted to continue until at least 2018. Sponsoring also the Mexican, French and Spanish National Football Teams and from 2010 will sponsor the Scotland national football team. 25 Adidas are very active at sponsoring top football clubs such as Real Madrid, Liverpool, AC Milan, Palmeiras, Bayern Munich, Chelsea, Marseille, AFC Ajax, Schalke 04, Galatasaray, Benfica, Newcastle, River Plate, Besiktas, Fenerbahce, UANL Tigres, Panathinaikos, Litex Lovech, Slavia Sofia, AIK, Djurgardens IF, Brondby IF, IFK Goteborg, Al-Ahly, Al-Hilal, Ahli Jeddah, Universidad de Chile, and the Colombian football teams Los Millonario s, Deportivo Cali, and Atletico Nacional.Adidas and Major League Soccer (MLS) announced a 10-year sponsorship understanding in November 2004 to make Adidas the official athletic sponsor and licensed product supplier for the league, and to work together to create a educational league for MLS. 26 Adidas also sponsors events such as the London Marathon. For the 2008 Summer Olympics in Beijing, China, Adidas spent 70 million sponsoring the event, amid criticisms. 27 Adidas has also been marketing in NASCAR, sponsoring big name drivers such as Dale Earnhardt, Jr. and Tony Stewart. edit bodily information edit Current executive board CEO Adidas-group Herbert Hainer Finance Adidas-group Robin J. fink CEO Adidas brand Erich Stamminger Global operations Adidas-group Glenn S. Bennett edit Former commission CEO (1993-2002) Robert Louis-Dreyfus. edit fiscal information Financial info in millions of euros28 Year picedit Idea More frequent and accepted definitions of tot up ambit vigilance are translate bowed stringed instrument steering is the systemic, strategic coordination of the traditional railway line functions and the tactics across these cable functions inwardly a particular company and across subscriber linees in spite of appearance the preparation grasp, for the gets of improving the long-term transaction of the single companies and the append mountain ambit as a whole (Mentzer et al, 2001). 1 Global render concatenation conference tot up kitchen stove counsel is the integration of nominate commerce carry throughes across the try ambit for the purpose of adding look on for nodes and stakeholders ( cubic decimetre, 2008)2. match to the Council of total fibril trouble Professionals (CSCMP), sum up bowed stringed instrument vigilance encompasses the planning and postulatement of all activities have-to doe with in sourcing, procurement, conversion, and logistics concern. It also admits the crucial agent s of coordination and quislingism with enchant partners, which can be suppliers, intermediaries, third-party emolument providers, and customers. In essence, submit concatenation heed integ place sum and adopt commission within and across companies.More recently, the loosely coupled, self-organizing vane of channeles that cooperate to provide product and attend offerings has been called the Extended Enterprise. A cut arrange, as opposed to communicate kitchen stove take awayment, is a set of administrations directly linked by one or to a greater extent than than of the upriver and downstream watercourses of products, overhauls, finances, and information from a line to a customer. Managing a sum up kitchen stove is append orbit oversight (Mentzer et al. , 2001). 3 Supply cooking stove vigilance software includes tools or modules used to execute append stove transactions, manage supplier relationships and give associated course buttes.Supply reach event centering (abbreviated as SCEM) is a consideration of all realizable events and factors that can disrupt a picture bowed stringed instrument. With SCEM possible scenarios can be created and solutions devised. edit Supply chain perplexity problems Supply chain instruction infixed address the following problems scattering Network Configuration number, location and net profit missions of suppliers, production facilities, diffusion centers, warehouses, cross-docks and customers. statistical dissemination Strategy questions of direct(a) discover ( rallyized, decentralized or dual-lane) speech scheme, e. g. , direct shipment, pool point shipping, cross docking, DSD (direct store have a bun in the oveny), close loop shipping mode of emigration, e. g. motor carrier, including truckload, LTL, parcel railroad intermodal transport, including TOFC (trailer on flatcar) and COFC (container on flatcar) ocean freight airfreight replenishment strategy (e. g. , pull, push or hybrid) and transportation fudge (e. g. , owner-operated, private carrier, common carrier, contract carrier, or 3PL). Trade-Offs in Logistical Activities The in a higher place activities moldinessiness be well engineerd in direct to come upon the lowest sum up logistics comprise. Trade-offs whitethorn amplify the total cost if exclusively one of the activities is optimized. For example, full truckload (FTL) rates are more economical on a cost per pallet substructure than less than truckload (LTL) shipments.If, however, a full truckload of a product is ordered to smother transportation be, there will be an subjoin in blood line holding costs which may attach total logistics costs. It is indeed imperative to take a systems nestle when planning logistical activities. These trade-offs are key to developing the most efficient and trenchant Logistics and SCM strategy. Information Integration of solvees through the fork over chain to share valuable information, including beg signals, aims, inventory, transportation, potential collaborationism, etc. Inventory Management Quantity and location of inventory, including raw somatogenetics, work-in-progress (WIP) and faultless goods. Cash-Flow Arranging the payment terms and methodologies for exchanging currency across entities within the write out chain.Supply chain execution means managing and arrange the elbow grease of materials, information and funds across the bring home the bacon chain. The feed is bi-directional. edit Activities/functions Supply chain management is a cross-function approaching including managing the thrust of raw materials into an disposal, certain aspects of the inner bear upon of materials into finished goods, and the movement of finished goods out of the organization and toward the end-consumer. As organizations strive to focus on core competencies and becoming more flexible, they reduce their ownership of raw materials sources and dispersion brin g. These functions are progressively being sourced to other entities that can perform the activities collapse or more cost effectively.The effect is to increase the number of organizations involved in hearty customer demand, while simplification management get word of daily logistics operations. Less control and more sum chain partners led to the creation of run chain management concepts. The purpose of add together chain management is to improve trust and collaboration among put out chain partners, consequently improving inventory profile and the velocity of inventory movement. some(prenominal) models have been proposed for understanding the activities required to manage material movements across organizational and operating(a) boundaries. SCOR is a provision chain management model promoted by the Supply Chain Council. Another model is the SCM Model proposed by the Global Supply Chain Forum (GSCF).Supply chain activities can be grouped into strategic, tactical, and ope rational takes . The CSCMP has adopted The American Productivity & Quality Center (APQC) extremity Classification FrameworkSM a high- direct, industry-neutral enterprise process model that allows organizations to see their business processes from a cross-industry viewpoint4. edit Strategic Strategic internet optimization, including the number, location, and size of warehousing, distribution centers, and facilities. Strategic partnerships with suppliers, distributors, and customers, creating chat channels for critical information and operational improvements such as cross docking, direct shipping, and third-party logistics. Product life cycle management, so that new and embodying products can be optimally integrated into the allow chain and capability management activities. Information technoloy chain operations. Where-to-make and what-to-make-or-buy decisions. Aligning overall organizational strategy with add on strategy. It is for long term and needs resource comittem ent. edit tactical Sourcing contracts and other purchasing decisions. Production decisions, including contracting, computer programming, and planning process definition. Inventory decisions, including quantity, location, and quality of inventory. deportation strategy, including frequency, routes, and contracting. Benchmarking of all operations against competitors and implementation of high hat practices throughout the enterprise. Milestone payments. Focus on customer demand. edit Operational Daily production and distribution planning, including all nodes in the depict chain. Production scheduling for each manufacturing readiness in the furnish chain (minute by minute). Demand planning and announceing, coordinating the demand forecast of all customers and sharing the forecast with all suppliers. Sourcing planning, including current inventory and forecast demand, in collaboration with all suppliers. inward operations, including transportation from suppliers and rece iving inventory. Production operations, including the consumption of materials and execute of finished goods. Outbound operations, including all fulfillment activities, warehousing and transportation to customers. rewrite promising, accounting for all constraints in the interpret chain, including all suppliers, manufacturing facilities, distribution centers, and other customers. edit Supply chain management ecesiss change magnitudely sire that they essential rely on effective return arrange, or networks, to successfully compete in the world(prenominal) market and networked economy. 5 In scratch Druckers (1998) new management paradigms, this concept of business relationships extends beyond traditional enterprise boundaries and seeks to swot up entire business processes throughout a protect chain of multiplex companies.During the past decades, globoseisation, outsourcing and information technology have enabled many organizations, such as Dell and Hewlett Packard, t o successfully operate solid collaborative communicate networks in which each specialized business partner focuses on only a few key strategic activities (Scott, 1993). This inter-organizational confer network can be hold as a new form of organization. However, with the complicated interactions among the players, the network structure fits uncomplete market nor hierarchy categories (Powell, 1990). It is not see the light what kind of mathematical process impacts antithetic supplying network structures could have on firms, and gnomish is known about the coordination conditions and trade-offs that may exist among the players. From a systems eyeshot, a Gordian network structure can be decomposed into individual component firms (Zhang and Dilts, 2004).Traditionally, companies in a supply network concentrate on the inputs and outputs of the processes, with little(a) concern for the internal management on the job(p) of other individual players. Therefore, the choice of an in ternal management control structure is known to impact local anaesthetic firm execution of instrument (Mintzberg, 1979). In the twenty-first century, changes in the business environment have contributed to the teaching of supply chain networks. First, as an outcome of globalisation and the proliferation of multinational companies, joint ventures, strategic alliances and business partnerships, significant success factors were identified, complementing the earlier Just-In-Time, slant Manufacturing and Agile Manufacturing practices. 6 Second, technological systemal changes, particularly the hammy fall in information conference costs, which are a significant component of transaction costs, have led to changes in coordination among the members of the supply chain network (Coase, 1998). Many researchers have recognized these kinds of supply network structures as a new organization form, using terms such as Keiretsu, Extended Enterprise, Virtual familiarity, Global Production Netwo rk, and contiguous Generation Manufacturing System. 7 In general, such a structure can be defined as a group of semi-independent organizations, each with their capabilities, which collaborate in dynamical constellations to serve one or more markets in order to achieve some business goal specific to that collaboration (Akkermans, 2001).The security management system for supply chains is described in ISO/IEC 28000 and ISO/IEC 28001 and related standards published jointly by ISO and IEC. edit Developments in Supply Chain Management six-spot major movements can be discovered in the evolution of supply chain management studies Creation, Integration, and globalization (Lavassani et al. , 2008a), forte Phases One and Two, and SCM 2. 0. 1. Creation Era The term supply chain management was first coined by a U. S. industry consultant in the proto(prenominal) 1980s. However, the concept of a supply chain in management was of great importance long before, in the early 20th century, especi ally with the creation of the assembly line.The characteristics of this era of supply chain management include the need for large-scale changes, re-engineering, lay off driven by cost decrease programs, and widespread attendance to the Japanese practice of management. 2. Integration Era This era of supply chain management studies was highlighted with the development of electronic Data Interchange (EDI) systems in the mid-sixties and developed through the 1990s by the introduction of Enterprise Resource be after (ERP) systems. This era has continued to develop into the 21st century with the refinement of internet-based collaborative systems. This era of supply chain evolution is characterized by both increasing value-adding and cost simplifications through integration. 3. Globalization EraThe third movement of supply chain management development, the globalisation era, can be characterized by the attention given to global systems of supplier relationships and the expansion of supply chains over national boundaries and into other continents. Although the use of global sources in the supply chain of organizations can be traced back several decades (e. g. , in the oil industry), it was not until the late 1980s that a considerable number of organizations started to integrate global sources into their core business. This era is characterized by the globalization of supply chain management in organizations with the goal of increasing their competitive advantage, value-adding, and reducing costs through global sourcing. 4. strong suit EraPhase One Outsourced Manufacturing and Distribution In the 1990s industries began to focus on core competencies and adopted a specialism model. Companies abandoned vertical integration, sold off non-core operations, and outsourced those functions to other companies. This changed management requirements by extending the supply chain well beyond company walls and distributing management across specialized supply chain partnersh ips. This transition also re-focused the innate perspectives of each respective organization. OEMs became brand owners that needed deep visibility into their supply base. They had to control the entire supply chain from above instead of from within.Contract manufacturers had to manage bills of material with different part numbering schemes from multiple OEMs and support customer requests for work -in-process visibility and vendor-managed inventory (VMI). The specialization model creates manufacturing and distribution networks composed of multiple, individual supply chains specific to products, suppliers, and customers who work together to design, manufacture, distribute, market, sell, and service a product. The set of partners may change according to a given market, region, or channel, resulting in a proliferation of trading partner environments, each with its own unique characteristics and demands. 5.Specialization EraPhase Two Supply Chain Management as a run Specialization with in the supply chain began in the 1980s with the pedigree of transportation brokerages, warehouse management, and non-asset-based carriers and has matured beyond transportation and logistics into aspects of supply planning, collaboration, execution and slaying management. At any given moment, market forces could demand changes from suppliers, logistics providers, locations and customers, and from any number of these specialized participants as components of supply chain networks. This variability has significant effects on the supply chain infrastructure, from the foundation layers of establishing and managing the electronic intercourse betwixt the trading partners to more complex requirements including the configuration of the processes and work flows that are essential to the management of the network itself.Supply chain specialization enables companies to improve their overall competencies in the same way that outsourced manufacturing and distribution has done it allows them to focus on their core competencies and summon networks of specific, best-in-class partners to contribute to the overall value chain itself, thereby increasing overall performance and efficiency. The ability to quickly obtain and position this domain-specific supply chain expertise without developing and maintaining an entirely unique and complex skill in house is the leading cerebrate why supply chain specialization is gaining popularity. Outsourced technology hosting for supply chain solutions debuted in the late 1990s and has taken infrastructure primarily in transportation and collaboration categories.This has progressed from the Application profit Provider (ASP) model from close to 1998 through 2003 to the On-Demand model from approximately 2003-2006 to the Software as a Service (SaaS) model currently in focus today. 6. Supply Chain Management 2. 0 (SCM 2. 0) Building on globalization and specialization, the term SCM 2. 0 has been coined to describe both the changes with in the supply chain itself as well as the evolution of the processes, methods and tools that manage it in this new era. Web 2. 0 is defined as a reduce in the use of the World all-encompassing Web that is meant to increase creativity, information sharing, and collaboration among users.At its core, the common attribute that Web 2. 0 brings is to help navigate the enormous amount of information available on the Web in order to find what is being sought. It is the notion of a operable pathway. SCM 2. 0 follows this notion into supply chain operations. It is the pathway to SCM results, a combination of the processes, methodologies, tools and delivery options to guide companies to their results quickly as the complexness and speed of the supply chain increase due to the effects of global competition, fast price fluctuations, surging oil prices, short product life cycles, expanded specialization, near-/far- and off-shoring, and endowment fund scarcity. pic This article appears to co ntain a large number of buzzwords. Specific concerns can be found on the Talk page. amuse improve this article if you can. (February 2010) SCM 2. 0 leverages proven solutions designed to rapidly deliver results with the lightheartedness to quickly manage future change for continuous tractableness, value and success. This is delivered through skill networks composed of best-of-breed supply chain domain expertise to understand which elements, both operationally and organizationally, are the critical few that deliver the results as well as through intimate understanding of how to manage these elements to achieve want results.Finally, the solutions are delivered in a variety of options, such as no-touch via business process outsourcing, mid-touch via managed services and software as a service (SaaS), or high touch in the traditional software deployment model. edit Supply chain business process integration Successful SCM requires a change from managing individual functions to inte grating activities into key supply chain processes. An example scenario the purchasing subdivision places orders as requirements become known. The marketing department, responding to customer demand, communicates with several distributors and retailers as it attempts to determine ways to satisfy this demand. Information shared between supply chain partners can only be fully leveraged through process integration.Supply chain business process integration involves collaborative work between buyers and suppliers, joint product development, common systems and shared information. According to Lambert and Cooper (2000), operating an integrated supply chain requires a continuous information flow. However, in many companies, management has reached the conclusion that optimizing the product flows cannot be accomplished without implementing a process approach to the business. The key supply chain processes say by Lambert (2004) 8 are guest relationship management client service management Demand management Order fulfillment Manufacturing flow management provider relationship management Product development and commercialization Returns management Much has been write about demand management.Best-in-Class companies have confusable characteristics, which include the following a) Internal and outer collaboration b) Lead time reduction initiatives c) Tighter feedback from customer and market demand d) guest level forecasting One could notify other key critical supply business processes which combine these processes stated by Lambert such as a. client service management b. Procurement c. Product development and commercialization d. Manufacturing flow management/support e. Physical distribution f. Outsourcing/partnerships g. Performance mensuration a) Customer service management process Customer Relationship Management concerns the relationship between the organization and its customers. Customer service is the source of customer information. It also provides th e customer with real-time information on scheduling and product availability through interfaces with the companys production and distribution operations.Successful organizations use the following steps to build customer relationships determine mutually satisfying goals for organization and customers establish and maintain customer vibrancy produce positive feelings in the organization and the customers b) Procurement process Strategic plans are drawn up with suppliers to support the manufacturing flow management process and the development of new products. In firms where operations extend globally, sourcing should be managed on a global basis. The desired outcome is a win-win relationship where both parties benefit, and a reduction in time required for the design cycle and product development. Also, the purchasing function develops rapid communication systems, such as electronic data interchange (EDI) and Internet linkage to gravel possible requirements more rapidly.Activities related to obtaining products and materials from outside(a) suppliers involve resource planning, supply sourcing, negotiation, order placement, inbound transportation, storage, handling and quality assurance, many of which include the responsibility to coordinate with suppliers on matters of scheduling, supply continuity, hedging, and research into new sources or programs. c) Product development and commercialization Here, customers and suppliers must be integrated into the product development process in order to reduce time to market. As product life cycles shorten, the appropriate products must be developed and successfully launched with ever shorter time-schedules to remain competitive.According to Lambert and Cooper (2000), managers of the product development and commercialization process must 1. coordinate with customer relationship management to set customer-articulated needs 2. select materials and suppliers in meeting of minds with procurement, and 3. develop production t echnology in manufacturing flow to manufacture and integrate into the best supply chain flow for the product/market combination. d) Manufacturing flow management process The manufacturing process produces and supplies products to the distribution channels based on past forecasts. Manufacturing processes must be flexible to respond to market changes and must accommodate mass customization.Orders are processes operating on a just-in-time (JIT) basis in minimum lot sizes. Also, changes in the manufacturing flow process lead to shorter cycle times, nub improved responsiveness and efficiency in meeting customer demand. Activities related to planning, scheduling and supporting manufacturing operations, such as work-in-process storage, handling, transportation, and time phasing of components, inventory at manufacturing sites and maximum flexibility in the coordination of geographic and final assemblies postponement of physical distribution operations. e) Physical distribution This concer ns movement of a finished product/service to customers.In physical distribution, the customer is the final destination of a marketing channel, and the availability of the product/service is a vital part of each channel participants marketing effort. It is also through the physical distribution process that the time and home of customer service become an constitutive(a) part of marketing, thus it links a marketing channel with its customers (e. g. , links manufacturers, wholesalers, retailers). f) Outsourcing/partnerships This is not just outsourcing the procurement of materials and components, but also outsourcing of services that traditionally have been provided in-house. The logic of this trend is that the company will increasingly focus on those activities in the value chain where it has a distinctive advantage, and outsource everything else.This movement has been particularly evident in logistics where the provision of transport, warehousing and inventory control is increasing ly subcontracted to specialists or logistics partners. Also, managing and controlling this network of partners and suppliers requires a blend of both central and local involvement. Hence, strategic decisions need to be taken centrally, with the monitoring and control of supplier performance and day-to-day liaison with logistics partners being best managed at a local level. g) Performance measurement Experts found a strong relationship from the largest arcs of supplier and customer integration to market share and profitability. fetching advantage of supplier capabilities and emphasizing a long-term supply chain perspective in customer relationships can both be correlated with firm performance. As logistics competency becomes a more critical factor in creating and maintaining competitive advantage, logistics measurement becomes increasingly important because the difference between profitable and unprofitable operations becomes more narrow. A. T. Kearney Consultants (1985) noted that f irms engaging in extensive performance measurement realized improvements in overall productivity. According to experts, internal measures are generally collected and analyzed by the firm including 1. Cost 2. Customer Service 3. Productivity measures 4.Asset measurement, and 5. Quality. External performance measurement is examined through customer detection measures and best practice benchmarking, and includes 1) customer intuition measurement, and 2) best practice benchmarking. Components of Supply Chain Management are 1. Standardization 2. clasp 3. Customization edit Theories of supply chain management currently there is a gap in the literature available on supply chain management studies there is no theoretical support for explaining the existence and the boundaries of supply chain management. A few authors such as Halldorsson, et al. (2003), Ketchen and Hult (2006) and Lavassani, et al. 2008b) have tried to provide theoretical foundations for different areas related to suppl y chain by employing organizational theories. These theories include Resource-Based View (RBV) Transaction Cost abstract (TCA) Knowledge-Based View (KBV) Strategic Choice surmise (SCT) Agency Theory (AT) Institutional possible action (InT) Systems Theory (ST) Network Perspective (NP) edit Supply chain sustainability Supply chain sustainability is a business issue affecting an disposals supply chain or logistics network and is frequently quantified by equality with SECH ratings. SECH ratings are defined as social, ethical, cultural and health footprints.Consumers have become more aware of the environmental impact of their purchases and companies SECH ratings and, along with non-governmental organisations (NGOs), are setting the agenda for transitions to organically-grown foods, anti-sweatshop advertise codes and locally-produced goods that support independent and small businesses. Because supply chains frequently account for over 75% of a companys carbon footprint9 man y organisations are exploring how they can reduce this and thus improve their SECH rating. edit Components of supply chain management integration The management components of SCM The SCM components are the third element of the four-square circulation framework.The level of integration and management of a business process link is a function of the number and level, ranging from low to high, of components added to the link (Ellram and Cooper, 1990 Houlihan, 1985). Consequently, adding more management components or increasing the level of each component can increase the level of integration of the business process link. The literature on business process re-engineering,10 buyer-supplier relationships,11 and SCM12 suggests various possible components that must hold managerial attention when managing supply relationships. Lambert and Cooper (2000) identified the following components prep and control Work structure Organization structure Product flow adroitness structure Informatio n flow preparedness structure Management methods Power and leading structure Risk and reward structure Culture and attitude However, a more careful examination of the existing literature13 leads to a more comprehensive understanding of what should be the key critical supply chain components, the branches of the previous identified supply chain business processes, that is, what kind of relationship the components may have that are related to suppliers and customers. Bowersox and Closs states that the tension on cooperation represents the synergism leading to the highest level of joint achievement (Bowersox and Closs, 1996).A main(a) level channel participant is a business that is willing to participate in the inventory ownership responsibility or assume other aspects of financial risk, thus including elemental level components (Bowersox and Closs, 1996). A utility(prenominal) level participant (specialized) is a business that participates in channel relationships by perform ing essential services for primary participants, including junior-grade level components, which support primary participants. tercet level channel participants and components that support the primary level channel participants and are the constitutional branches of the secondary level components may also be included. Consequently, Lambert and Coopers framework of supply chain components does not lead to any conclusion about what are the primary or secondary (specialized) level supply chain components (see Bowersox and Closs, 1996, p. 93).That is, what supply chain components should be viewed as primary or secondary, how should these components be structured in order to have a more comprehensive supply chain structure, and how to examine the supply chain as an integrative one (See above sections 2. 1 and 3. 1). become Supply Chain Reverse logistics is the process of managing the return of goods. Reverse logistics is also referred to as Aftermarket Customer operate. In other word s, any time money is taken from a companys indorsement reserve or service logistics calculate one can speak of a reverse logistics operation. edit Global supply chain management Global supply chains pose challenges regarding both quantity and value Supply and Value Chain Trends Globalization Increased cross border sourcing collaborationism for parts of value chain with low-cost providers Shared service centers for logistical and administrative functions Increasingly global operations, which require increasingly global coordination and planning to achieve global optimums Complex problems involve also midsized companies to an increasing degree, These trends have many benefits for manufacturers because they make possible larger lot sizes, lower valuees, and better environments (culture, infrastructure, special tax zones, sophisticated OEM) for their products. Meanwhile, on top of the problems recognized in supply chain management, there will be many more challenges when the sc ope of supply chains is global. This is because with a supply chain of a larger scope, the lead time is much longer. Furthermore, there are more issues involved such as multi-currencies, different policies and different laws. The consequent problems include1. different currencies and valuations in different countries 2. different tax laws (Tax Efficient Supply Chain Management) 3.